We provide the hardware. You use your favourite IDE.
VS Code as your one-stop solution for Embedded Development.
Run and debug your code with J-Link.
Stimulate and observe pin behavior.
Neatless integration into VS Code.
New to the ExecutionPlatform?
It is a Processor-in-the-Loop test system: your microcontroller sits on a plug-in board, and the test system drives and observes every pin.
Debug your code
Use the integrated SEGGER J-Link for powerful debugging.
Pre-configured plugin so that you can debug your embedded software directly from VS Code.
Debug from anywhere with network-based access.
Stimulate and measure pin behavior
Stimulate and measure pin behavior with our peripheral-specific Endpoints.
Write short sequences in pytest or Robot Framework for your scenario.
Use tests to interactively explore the behavior of your Microcontroller.
Support for the peripherals you need.
Each endpoint provides a set of functions you need to test the peripheral.
Introduce fault scenarios to improve coverage.
Observe any pin behavior from VS Code.
Programmable Saleae logic analyzer interface.
Choose up to 8 microcontroller pins for observation from VS Code.
No cabling. Reconfigure pin usage for each test.
What our customers say.
"The very good insight into the microcontroller behavior down to the pin is particularly helpful in day-to-day work, and the freely programmable logic analyzer and integrated debugger allow complex behavioral scenarios to be fully displayed and understood. The fact that this is possible without unplugging cables and also from the home office makes the ExecutionPlatform a valuable tool for me."
Fabian Frese
Senior Software Architect
Steps we recommend to learn more about the ExecutionPlatform.